Dodge Viper

3.4712411705155 (991)
Posted by kaori 03/25/2009 @ 00:11

Tags : dodge viper, dodge, cars, leisure

News headlines
Our Towns A New York Dodge Dealer and His Legacy - New York Times
Chuck Tator, who still lives above the dealership, became known as one of the most proficient service people for Dodge Vipers, the $90000 10-cylinder sports cars lusted after by car aficionados. “He's one of the absolute masters, the guy to go to on...
Connect a Dodge Viper to your computer - CNET News
The company behind Road Mice, Four Door Media, just announced three new models, the Dodge Viper, Chrysler PT Cruiser, and Chrysler 300C. Considering the financial threats to Chrysler's existence, those models might not be around long as actual cars,...
Kirby: Racing rule No. 1: Steer clear of the car - Salt Lake Tribune
My favorite was Primetime Race Group's Dodge Viper. There was no mistaking that full-throated American big block when it came by. It sounded like God unzipping the sky. The race lasted more than two hours and included two pit stops....
Dodge Viper May Be Discarded in Chrysler Bankruptcy - U.S. News Rankings & Reviews
Autoblog comments, "Although the Viper is an entirely different beast to the exotica built by Fiat subsidiary Ferrari, considering what the Dodge supercar represents, we couldn't imagine Fiat being too eager to keep the Viper alive....
Chrysler looks to shut 2 local dealers - Lower Hudson Journal news
When news of the company's efforts reached the trade press, a letter-writing campaign on Tator's behalf was launched by owners of the Dodge Viper muscle car. Tator specializes in Viper maintenance and repair, and he has earned a following both in the...
Wall Wins Second Race In 2009 Australian GT Classic Enduro At ... - PaddockTalk
While Wall led from the rolling start he was closely shadowed by Jim Richards (Shannons Porsche 997 GT3 Cup Car) and Ross Lilley (Laminex/Koala Furniture Dodge Viper GT3) with Richards taking over the front running on lap 6 until Wall re-passed him on...
Why $90000 Doesn't Always Buy You a Comfortable Car - Reuters
The car pictured is the Dodge Viper, a street-legal race car with a 600-horsepower V10 engine that costs more than $90000. It will do zero to 60 in less than 4 seconds and top out at 200 mph. (And unfortunately, it's being discontinued at the end of...
Chrysler Handing $1K To Return Buyers -
There's no word on which vehicles may or may not be included in the plan--for sure, the slow-selling Dodge Avenger and Chrysler Sebring will be on the list, but it's uncertain whether the company will send out rebates for its Dodge Viper sportscar or...
Mosport: K-PAX/3R Racing race report -
Randy Pobst, of Gainesville Georgia, started his #1 K-PAX/3R Racing Volvo S60-R on the front row due to the inversion of the top five qualifiers and after losing the drag race to race winner Jason Daskalos' V-10 powered Dodge Viper and getting passed...
Mercedes prototype revealed - WA today
It may look like a Dodge Viper, but you're looking at a photo of a new Mercedes supercar prototype that will become the spiritual successor to the car maker's famous 300SL Gullwing of the 1950s. Mercedes has commissioned German company HWA – a spin-off...

Dodge Viper

Dodge Viper GTS - the fixed-roof coupe version of the Viper

The Dodge Viper is a V10-powered sports car manufactured by the Dodge division of Chrysler LLC. Production of the two seat sports car began at New Mack Assembly in 1992 and moved to its current home at Conner Avenue Assembly in October 1995. The car, as well as numerous variations of it, has made countless appearances in TV shows, video games, movies, and music videos. All generations had the same 6-speed manual transmission.

The Viper was conceived as a historical take on the classic American sports car. The iconic AC Cobra was a source of inspiration, and the final version of the Viper bears this out with its powerful engine, minimalist straightforward design, muscular and aggressive styling, and high performance. Some saw claims to kinship with the Cobra as a marketing exercise, ignoring that Carroll Shelby was heavily involved in the initial design of the Viper, and subsequent design of the Viper GTS coupe. Notably, the later (1996 through 2002) Viper GTS coupe took a few design cues from the Pete Brock designed Shelby Cobra Daytona. Though the proportions seem similar at first glance, the designs are quite unique. Carrol Shelby was key in the development of the R/T 10 as well as having a hand in the development of the GTS model.

The Viper was initially conceived in late 1988 at Chrysler's Advanced Design Studios. The following February, Chrysler president Bob Lutz suggested to Tom Gale at Chrysler Design that the company should consider producing a modern Cobra, and a clay model was presented to Lutz a few months later. The car appeared as a concept at the North American International Auto Show in 1989. This concept vehicle was originally named Copperhead because of its low, wide appearance characteristic of reptiles. All engines for the Viper have since been known as "copperhead." The name would later be changed to Viper. Public reaction was so enthusiastic, that chief engineer Roy Sjeoberg was directed to develop it as a standard production vehicle.

Sjoberg selected 85 engineers to be "Team Viper," with development beginning in March 1989. The team asked the then-Chrysler subsidiary Lamborghini to cast some prototype aluminum blocks based on Dodge's V10 truck engine for sports car use in May. The production body was completed in the fall, with a chassis prototype running in December. Though a V8 was first used in the test mule, the V10, which the production car was meant to use, was ready in February 1990.

Official approval from Chrysler chairman Lee Iacocca came in May 1990. One year later, Carroll Shelby piloted a pre-production car as the pace vehicle in the Indianapolis 500 race. In November 1991, the car was released to reviewers with first retail shipments beginning in January 1992.

The first prototype was tested in January 1989. It debuted in 1991 with two pre-production models as the pace car for the Indianapolis 500 when Dodge was forced to substitute it in place of the Japanese-built Stealth because of complaints from the United Auto Workers, and went on sale in January 1992 as the soft roofed RT/10 Roadster.

The centerpiece of the car was its engine. It was based on the Chrysler LA design, which was a truck engine. The original configuration made it too heavy for sports car use, so Lamborghini, then owned by Chrysler Corporation, revamped Dodge's cast-iron block V10 for the Viper by recasting the block and head in aluminum alloy. Some within Chrysler felt the pushrod two-valve design, while adequate for the truck application, was unsuitable for a performance car and suggested a more comprehensive redesign which would have included four valves per cylinder. Chrysler, however, was uncertain about the Viper's production costs and sales potential and so declined to provide the budget for the modification.

The engine weighed 711 lb (323 kg) and produced 400 bhp (300 kW) at 4600 rpm and 465 lb·ft (630 N·m) at 3600 rpm, and thanks to the long-gearing allowed by the engine, provided fuel economy at a United States Environmental Protection Agency‎-rated 12 mpg-US (20 L/100 km; 14 mpg-imp) city and 20 mpg-US (12 L/100 km; 24 mpg-imp) highway. The body was a tubular steel frame with resin transfer molding (RTM) fiberglass panels. Some small bits of the suspension, (tie-rod ends and parts of the front wheel hubs) following the manufacturer's "engine first" mantra, were sourced from the Dodge Dakota pickup. It had a curb weight of 3,280 lb (1,490 kg) and lacked all modern driver aids such as traction control or anti-lock brakes. Car and Driver magazine referred to this generation as "the world's biggest Fat Boy Harley," and likened driving it to "playing ping pong with a Louisville Slugger baseball bat." Despite this, in straight line performance, it completed a quarter mile in 12.6 seconds and had a maximum speed of over 180 mph (290 km/h). Its large tires allowed the car to average close to 1 lateral g in corners, placing it among the elite cars of its day. However, the car proved tricky to drive at high speeds, particularly for the unskilled.

The car was spartan, although it featured inflatable lumbar support and adjustable seats. Along with the absence of exterior door handles, the vehicle lacked side windows and a roof. Although a soft top cover was available, it was designed primarily for outdoor vehicle storage. Side curtains of fabric and clear plastic operated by zippers could be inserted into the door and hand-bolted when needed. All of these decisions were made to reduce weight. The battery is located in the sealed compartment over the rear wheel well to increase rear-end weight and traction. The car shipped with a tonneau cover and video tape on soft-top assembly (the soft top is removable and folds to fit in the trunk). In 1994 A/C was added as an option.

A coupe model called the GTS was also introduced in 1996. Dubbed "dubble bubble," the roof featured slightly raised sections above each seat to accommodate usage of helmets, a throwback to its intended purpose. Vipers can be seen participating often in drag racing, road racing and drifting. The GTS, like its predecessor, was chosen as the pace car for the 1996 Indianapolis 500.

Despite its similar outward appearance, the car was distinct enough to be considered a new generation model. Extensive modifications such as a reworked engine with higher power and less weight, an almost completely redesigned chassis that was made 60 lb (27 kg) lighter and 25% stiffer in torsional rigidity through meticulous computer analysis, a thoroughly redesigned suspension, and reduced braking distances; the 1996 to 2002 Viper GTS had a lighter (approximately 650 lb (290 kg)) 450 bhp (340 kW) engine, which could complete the quarter mile in 12.3 seconds, 0.3 seconds and 8 mph (13 km/h) faster than its predecessor, and increased top speed by 11 mph (18 km/h) or so. The revised suspension, stiffer chassis, and aerodynamic body raised lateral grip to 0.98 g (9.6 m/s²), although other reports show the 1992 model with 1.0 g. Contemporary tires have improved upon this measure significantly. Slalom runs could often reach or exceed 70 mph (110 km/h). Brakes once again lacked ABS initially, and proved to be the car's weakest point. The brakes cost the car in numerous comparison tests, such as a 1997 "supercar comparison" by Motor Trend, in which the Viper GTS placed at the top against cars such as the Ferrari 550, Chevrolet Corvette, Porsche 911, and Honda NSX in all performance exercises except braking. The car not only placed last, but had considerably longer stopping distances than other vehicles. ABS was introduced further into the production run, though braking performance was not necessarily significantly improved. In a Sports Car International comparison conducted in 2002, the Viper ACR (with ABS) was compared to the 911 GT2 at Thunderhill Raceway Park. Both cars were very capable, and quick around the test track, but the Viper proved more difficult to drive, and the braking system was blamed very specifically for the gap in lap times (approximately GT2: 2 minutes, ACR: 2:04) between the two cars.

Along with the updated performance came the inclusion of some of the "luxuries" the car did without before. Dual front airbags were added to the vehicle's safety equipment list in 1996 on the GTS and 1997 on the R/T10 as mandated by the government. The car was also exported to Europe, where it was rebadged as a Chrysler, and sold under this marque from 1997 to 2003. European models had a detuned version of the Copperhead V10.

In the first six years of production almost 10,000 Vipers were sold. Minor evolutionary changes including new 18" diameter wheels and were introduced in the 1999 model. Subsequent versions featured light-weight hypereutectic pistons and an improved exhaust system, side exhaust having been dropped part way through production year 1996 for the RT/10, all production GTS Viper Coupes had rear exit exhaust. 1999 saw the introduction of the Cognac Connolly interior package. Continuing the refinements, ABS was introduced in 2001. In 2002, the end of second generation production was celebrated with the release of 360 commemorative "Final Edition" models. These models were painted red with white stripes, paying tribute to the famous race-winning Oreca cars.

The Dodge Viper underwent a major redesign in 2003, courtesy of DaimlerChrysler's Street and Racing Technology group. The new Viper SRT-10 was heavily restyled with sharp, angled bodywork. The engine's displacement was enlarged to 505 cu in (8.3 L) which, with other upgrades, combined to increase output to 500 bhp (370 kW) and 525 lb·ft (712 N·m). Along with the power increases, weight was reduced into the 500 lb (230 kg) range. The chassis was also improved. It became more rigid and weighed approximately 80 lb (36 kg) less than the previous model. An even lighter and stronger chassis was planned, but was abandoned because of cost (parts from the planned suspension were used in the Hennessey Viper Venom 1000 Twin Turbo.) The initial model was a convertible. In 2004, Dodge introduced a limited edition Mamba package. Mamba edition cars featured black interiors, with red stitching and trim and saw their MSRP price rise by roughly US$3000. 200 Mambas were produced.

The Viper SRT-10 Coupe was introduced at the 2005 Detroit Auto Show as a 2006 model. It shares many of its body panels with the convertible but takes its side and rear styling is similar to the Competition Coupe. The coupe looks much like the previous Viper GTS and retains the "double-bubble" roof shape of the original, along with the original GTS's taillights as well offering the original Viper Blue paint scheme with white stripes (referred to as GTS Blue) for an added homage to the original Viper coupe. The engine is SAE certified to produce 510 bhp (380 kW) and 535 lb·ft (725 N·m). The engine makes the same power as before, only the published numbers changed. Unlike the original coupe, the chassis was not modified. This makes the coupe heavier than the convertible, and thus slightly slower to accelerate. Handling and high speed performance are improved by the coupe's stiffer frame, reduced drag, and increased downforce.

No 2007 model Vipers were produced. Instead, Chrysler chose to give the 2006 model an extended run while preparing the updated 2008 model.

In 2008, with the introduction of the 510 cu in (8.4 L) V10, the Viper produced 600 bhp (450 kW) and 560 lb·ft (760 N·m), and also received better flowing heads with larger valves, Mechadyne cam-in-cam variable valve timing on the exhaust cam lobes, and dual electronic throttle bodies. The rev limit was able to be increased by 300 rpm due to the improved valve-train stability from both the new camshaft profiles and valve-springs. The development of the engine was done with some external assistance from McLaren Automotive and Ricardo Consulting Engineers. Electronic engine control is developed by Continental AG, the controller is capable of monitoring the crankshaft and cylinder position up to six times during each firing and has 10 times more processing power compared to the previous unit.

Changes outside of the engine were less extreme. The Tremec T56 transmission has been replaced with a new Tremec TR6060 which now has triple first gear synchronizers and doubles for higher gears. The Dana M44-4 rear axle from the 2003-2006 model now has a GKN ViscoLok speed-sensing limited-slip differential that greatly helps the tires in getting grip under acceleration. Another performance upgrade was the removal of run-flat tires; the new Michelin Pilot Sport 2 tires have increased driver feedback as well as grip and, along with revised suspension (springs, anti-roll bars, and shock valving), has made the Viper more neutral in cornering.

The modifications made to the 2008 model year car were enough for Chrysler to make it distinct from the first SRT-10, and the 2008 model became known as Gen IV, just in time for release with Chevrolet's 638 hp (476 kW) Corvette ZR1. Another notable change is the reworking of the exhaust system, previous third generation Vipers had their exhaust crossover under the seats which resulted in a large amount of heat going into the cockpit, this was done initially to help improve the cars exhaust note, since the first 2 generations of Viper, which had no crossover, were criticized for their lackluster exhaust notes. For 2008, the Viper exhaust will utilize a new exhaust system with no crossover, reducing the heat that enters the cockpit.

The electrical system has been completely revised for 2008. Changes include a 180-amp alternator, twin electric cooling fans, electronic throttles, and completely new VENOM engine management system. CAN bus architecture has been intertwined with pre-existing systems to allow for regulatory compliance. The fuel system was upgraded to include a higher capacity fuel pump and filtration system.

Car and Driver recently tested the car and got a 0-60 mph (97 km/h) time of 3.5 seconds, a 0-100 mph (160 km/h) time of 7.6 seconds and a Quarter Mile-time of 11.5 seconds at 126 mph (203 km/h). Dodge's claims for top speed are 197 mph (317 km/h) and 202 mph (325 km/h), for the Roadster and Coupe respectively. Car and Driver also tested the Viper's track performance, and managed a fast sub 3 minute lap time around Virginia International Raceway. The Viper's time, despite hot weather, was faster than the Corvette Z06, Ford GT, Porsche 911 Turbo and 911 GT3, Audi R8, and other such cars. According to Car and Driver and Motor Trend, the car's slightly adjusted suspension setup and new differential gave it cornering ability as sharp as before with even better control, feedback, and response.

The second generation Vipers were exported to Europe, where they were sold as Chryslers.

The third generation Viper was being sold in Europe during 2005-2006, the first model to be sold as a Dodge, as part of Chrysler's new sales strategy for the European market. In the United Kingdom it is referred to as a Viper, but it is actually sold as the Dodge SRT-10, as the Viper name is a registered trademark in the UK. Prodrive currently handles the importation and modification of Vipers to meet European laws.

In order to meet FIA homologation requirements as well as to celebrate Chrysler winning the 1997 FIA GT2 class championship, 100 modified Viper GT2 Championship Edition street legal cars were sold. These upgraded GTS cars were rated at 460 hp (343 kW) and 500 lb·ft (678 N·m) of torque. It featured bodywork aesthetically similar to the GTS-R with its paint job, aerodynamics package, and visual options in order to publicize the Viper's achievement in the FIA GT Championship.

The American Club Racing (ACR) model was introduced in 1999. This model featured suspension and engine enhancements focused on maximizing performance in road racing and autocross environments. Horsepower was (by way of K&N air filters and smooth intake tubes) bumped to 460 hp (343 kW) in these models, while torque went to 500 lb·ft (678 N·m). Weight was reduced by over 50 pounds (23 kg) by stripping the interior and removing other non essential items such as the fog lamps. The new stiffer, adjustable suspension removed another 14 pounds (6.4 kg) Along with engine and handling mods, these models are distinguished by an "ACR" badge, along with 20 spoke BBS wheels.

A new ACR was added to the Viper line up after the 2008 model year. Its upgrades are more drastic than the original, including street legal racing tires, two piece brake rotors, adjustable suspension, and significant aerodynamic revision. No engine modifications were made, so figures remain at 600 hp (448 kW) and 560 lb·ft (760 N·m) as in the base car. The ACR gives an advantage of being street legal. The ACR is similar to the MOPAR Viper that Dodge displayed at various auto shows. Weight is also decreased by as much as 80 lb (36 kg) by way of the "Hardcore Package" which deletes radio, speakers, amplifier, trunk carpet, hood pad and tire inflator. Its aerodynamic upgrades produce 1000 lbf (4.4 kN) of down-force at 150 mph (240 km/h), or roughly 10 times the downforce the base Viper SRT-10 can produce at the same speed. No upgrades were given to the interior except for the addition of a professional beacon-tripped lap timer.

The Vipers ACR is built along side the standard SRT-10 at the Conner Avenue plant in Detroit. The aerodynamic components are produced and assembled to the vehicle by Prefix Corporation located in Rochester Hills, Michigan.

The 2009 Viper SRT-10 ACR currently holds the second fastest Nürburgring lap time set by a production car with a time of 7:22.1.

A prototype 2008 Mopar Viper Coupe, with 675hp, appeared at the 2007 North American International Auto Show. There are currently no plans for production. This concept appears to have been a sneak peak at the Viper ACR. Performance parts from this car may eventually be available for sale through Mopar.

The Hennessey Viper is a modified version of the Dodge Viper with an 8.5-liter Venom 1000 Twin Turbo V-10 engine producing 1,000 horsepower (750 kW) and 1,100 lb*ft (1489.71 Nm) of torque. It goes from 0-60 mph in 2.9 seconds and 0-200 in 19.9 seconds and has an estimated top speed of 255 mph (410 km/h). Only 100 of these cars were made.

The Chrysler Firepower was a grand touring concept based on the Viper chassis that would have been equipped with the Hemi V-8. The pricing would have targeted a slightly less affluent buyer, or one desiring an automatic transmission.

The Dodge Copperhead was a concept car based on the Viper platform that was intended as a cheaper, more nimble car. It was powered by a V6 engine instead of the Viper's V10. It never reached production.

Major automotive media outlets have speculated the Viper will be discontinued after the 2011 model year and that Chrysler will close Conner Avenue Assembly. Though Chrysler had not yet officially commented on the issue, the 25,000th Viper is owned by Kurt Busch and the milestone was commemorated by Bob Nardelli, Chrysler LLC Chairman, in a ceremony at the Conner plant in March 2008.

On 29th of December 2008 Dodge has pulled the plug on the Viper sports car, unless a buyer for that model can be found.

Following the release of the Viper in 1992, several North American and European teams attempted to race Viper RT/10s. Based on production cars and using an added roof for rigidity, the cars were not able to perform as hoped. Although they were never officially backed by Dodge, they got the company interested in developing a fully-backed race car by time the second generation Viper was under development.

Based on the Viper GTS, the GTS-R was launched in late 1995 as an attempt to prove the capabilities of the Viper design worldwide, although the racing programs would mostly concentrate on Europe. Using such production engine components as the block, cylinder heads, and crankshaft, Dodge engineers were able to extract up to 750 hp (559 kW) from the normally 450 hp (336 kW) second generation 8.0 L V10 engine. The chassis was re-engineered from the ground up by British sports manufacturer Reynard Motorsport's Special Projects Division under chief engineer Paul Brown, while Oreca would assemble and maintain the racing cars.

The car made its competition debut in the 1996 24 Hours of Daytona with Canaska Racing, followed by Oreca in the BPR Global GT Series. Oreca would go on to take most of the success with the Viper, winning the FIA GT Championship three times, 24 Hours of Le Mans class wins three times, and an overall win at the 24 Hours of Daytona in 2000.

Following the end of official factory support for the program in 2001, Vipers have been used by privateer teams with much success. Viper GTS-Rs continued to be used competitively even into 2007.

As of 2003, a special, non-street legal Viper SRT-10 Competition Coupe is available from Dodge for race car drivers, picking up where the GTS-R racing variant left off. The power and torque ratings have been improved, along with the vehicle being stripped of anything not essential for racing, such as the interior body panels, carpet, instrumentation, air conditioning, and stereo systems which lightened the car by 380 lb (170 kg). The Competition Coupe comes equipped with a full roll cage, a racing fuel cell, and other racing-related equipment. It is not sold through dealers and is purchased from Dodge directly as, essentially, a very expensive race car component. Pricing is approximately US$140,000. The Viper Competition Coupe sees action in the highly competitive SCCA Speed GT World Challenge.

In 2004 Samuel Hubinette used a Competition Coupe with a modified rear axle for the Formula D, in which he won the title before the car was barred by the end of the season (due to the fact FD would adopt D1 Grand Prix regulations from the following year which had already prohibited the car from competing) and was replaced by an SRT-10 the following season.

After a few one-off entries in the Spa 24 Hours, from 2006, the Viper Competition Coupe raced in Europe fulltime for the first time, joining the new FIA GT3 European Championship with the Italian team Racing Box. At the end of the year, Oreca announced the development of a package transforming the car to GT2 regulations in national championships.

The Primetime Race Group use a Viper Competition Coupe in the American Le Mans Series in the GT2 class. They began racing in the end of the 2007 American Le Mans Series season. For the 2008 American Le Mans Series season they're racing full-time with Hankook Tires. The car's best result was a 5th place in the GT2 class at the 2008 12 Hours of Sebring.

To the top

Dodge Viper E85

On July 18, 2007 Ron Misjak Jr, Ron Misjak Sr and Johnnie set the record for world's fastest gasoline-powered street car with their modified E85 (Ethanol 85) powered Dodge Viper in standing mile run, reaching 220.7 mph in 27.41 seconds. They shattered the previous record of 217.85 mph. The run was on the Oscoda-Wurtsmith Airport runway, Oscoda, Michigan. This is a very crucial achievement for the green car revolution, given that E85-based modified Engine has been able to achieve outstanding performance, breaking the conventional myth about green car's poor performance.

To the top

Dodge Copperhead

Dodge Copperhead

The Dodge Copperhead, also known as the Dodge Concept Car and Dodge Concept Vehicle, was a concept car created by Dodge, and was intended to be a version of the Dodge Viper for people who couldn't afford the Viper's $75,000 USD price tag. The Dodge Copperhead is one of the most well-known concept cars of all time.

The Dodge Copperhead was unveiled in 1998 to great avail. Many were impressed with its aerodynamic, yet rugged styling and the fact that its production price tag would be about $30,000 USD ($45,000 less than the Viper). The Copperhead, unlike the Viper, was made more for handling and driving pleasure, while the Viper was made more for raw power. The Copperhead had excellent handling due to its low, wide stance. Dodge engineered the Copperhead to make the driver feel the road and the pavement, and this was done by stretching the wheels to the end of the frame, adding 5" of ground clearance and a stiff suspension, making this car marketed more towards enthusiasts.

After the unveiling of the Copperhead, Dodge got complaints from another company that had the copyrights to the Copperhead name, and as a result, Dodge could not use it. To avoid lawsuits, DaimlerChrysler unoffically renamed the car, with it being referred to as the 'Concept Vehicle' instead of 'Copperhead' in modern press kits, and on scale toys and merchandise. This makes press kits or items with the Copperhead name collectibles. The Copperhead's name controversy is accredited as the most likely reason why the car never reached the production line.

Despite the fact that the Copperhead never went into production as itself due to the name controversy, many fans believe that it went in production as the 2003 Dodge Viper, because of the convertible's uncanny resemblance to the Copperhead. There is also a rumor that the Copperhead (with a little bit of the Dodge Razor mixed in) will go into production as the Dodge Scooter, but DaimlerChrysler hasn't confirmed this.

The Copperhead is a very well-known concept car, and has appeared all over the market. Toy car makers like Hot Wheels, Maisto, and Matchbox, among others, have created scale toys and models of the Copperhead. The Copperhead can also be found on just about any calendar or media relating to concept cars.

To the top

Source : Wikipedia